info@wrenchitup.ca

DIY Faucet Installation Made Easy: Your Step-By-Step Guide To Success

Wrench It Up > Academy > DIY > DIY Faucet Installation Made Easy: Your Step-By-Step Guide To Success

Are you tired of your old, leaky faucet? Or maybe you just want to upgrade the look of your bathroom or kitchen. Whatever the reason, installing a new faucet is a great way to give your space a fresh, updated feel, and the best part. You can do it yourself! In this blog post, we will guide you through the process of installing a faucet, step-by-step.

Before you begin, it is important to gather the necessary tools. You will likely need an adjustable wrench, pliers, a basin wrench, a screwdriver, and Teflon tape.

The first step is to turn off the water supply to your sink by turning off the shut-off valves located under the sink. If there are no shutoff valves, you will need to turn off the main water supply to your home.

Next, remove the old leaky faucet by using an adjustable wrench and pliers to remove the nuts and bolts that hold it in place. Save any washers or gaskets that come off during this process.

Now it is time to install the new faucet. Place the rubber or plastic gasket that came with your faucet onto the sink and carefully lower the faucet into place. Center it over the sink’s mounting hole and secure it in place using the nuts and bolts that came with it.

Connect the hot and cold water supply lines to their respective valves under the sink. Use Teflon tape to wrap around the threads of each connection to prevent leaks. Tighten these connections securely with a basin wrench.

Finally, test your new faucet to ensure that it is working properly. Turn on the water supply and check for any leaks or drips.

If you may need to call a professional plumber in Toronto, we are here to help. Just give us a call now!

Wrench It Up – WIN YOUR HEART!